eSWINGO 200+

The eSwingo 200+ is the first fully electric compact sweeper from Schmidt. It is ideal for daily cleaning and sweeping duties in inner-city and pedestrianised areas plus industrial locations and multi-storey car parks. The eSwingo 200+ is not only one of the cleanest compact sweepers on the market, but it also pays for itself in the overall whole life cost calculation. With the eSwingo 200+, up to 85% of energy costs and up to 70% of maintenance costs can be saved compared to a model with a diesel engine.

Battery Total capacity: 75 kWh / 400 V

Operating time without re-charging: 10h

Charging time: 4h

Empty weight of the basic unit approx.: 3,300 kg

Hero view_rb19.jpg
Environmentally friendly electric drive

The eSwingo 200+ is characterised by a fully electric drive. The heart of the drive is a high voltage, 75 kWh. battery which consists of two individual battery packs. High-quality components guarantee durability (at least 5000 charging cycles) and safety, thanks to non-flammable and explosion-proof battery cells. The battery is equipped with a battery management system (BMS), which monitors and controls the battery, the charging and discharging processes and the temperature. The powerful batteries allow operating times of up to 10 hours without recharging.
An integrated on-board quick charger ensures complete recharging in just four hours.
The drives of all main functions - traction drive, blower drive, hydraulic pump drive and air conditioning of the driver's cab - have been electrified. The electric drive offers higher efficiency, optimum power characteristics and high performance with low maintenance requirements.

Only an electric motor, which is directly connected to the rear axle, is used for the drive and gives speeds of up to 50 km/h, while the noise level is many times lower than that of a diesel vehicle. An electric parking brake system with hill start assistance guarantees safe and comfortable driving.

Sweeping technology:
The eSwingo 200+ is available with two independent sweeping systems. A pushed 2-broom system with a brush diameter of 850mm or a pulled 3-broom system with a brush diameter of 800mm. Both systems are available with either dependent or independent disc brush control using convenient controls on the driver's door. The brush speed and pressure can be infinitely adjusted. The brooms can be chosen in plastic, steel or mixed trimmings, and the suction nozzle between rollers or runners.
The 2-broom system with independently controllable circular brushes guarantees absolute mobility in every sweeping situation. Two stable broom arms with integrated buffers allow sweeping widths of up to 2,900mm. Independent broom control is available as an option, offering separately controllable brooms, up/down, left/right, and contact pressure control, guaranteeing clean sweeping results with minimum wear and tear. The broom always returns to its basic position, regardless of road conditions. A version for heavy weed use is also available with additional hydraulic tilting functions for the broom.

The 3-broom system with freely movable front broom arm offers a wide range of options and a sweeping width of up to 2,600mm. Left-right alignment of the front broom is available, along with sweeping on two levels or heavy weed broom use. All functions of the front broom are hydraulically controlled, including the broom support pressure. The broom unit under the cabin ensures optimum feed of the sweeping material to the suction shaft. As an option, the side brushes can also be extended hydraulically and their angle can be adjusted so that they are ideally positioned in relation to the ground conditions in sweeping operations.

The eSwingo 200+ is certified with the highest level PM10 4-star and PM2.5. The certificate is considered a quality standard throughout Europe with four stars in the PM10 test for the highest level of air pollution control, along with the best possible absorption performance with PM2.5.

With the unique Koanda air circulation system in combination with the pressurised circulating water system, the emission of fine, harmful dust is reduced by up to 70%. A large part of the dust-laden air sucked in remains in the suction system and is returned to the suction mouth in a circuit. The small amount of residual air remaining is cleaned by a fine-pored filter. In addition, the Koanda system gives reduced noise emission, low water consumption and allows sweeping at slightly below-zero temperatures.

Sweeping material hopper:
The hopper, which has a system volume of 2m³, enables maximum sweeping capacity and a large radius of action. The hopper is made of corrosion and seawater resistant aluminium. A large dumping height of 1400mm enables emptying into all common dirt containers. The suction pipe in the hopper is optionally available in wear-resistant stainless steel.

Ergonomics and Comfort:
The spacious cabin is equipped with high-quality noise and vibration insulation. The front windscreen, which extends down to the floor, and the viewing window in the cab floor, provide an optimum view of the sweeping unit and suction nozzle. The excellent all-round visibility contributes to a pleasant working environment and supports safe operation in road traffic.

The standard and powerful air conditioning system creates a pleasant and cool working climate even at high outside temperatures. Fresh air is sucked in and filtered at the rear of the cab, while the cab air filter is also designed as a pollen filter. The sweeping unit is controlled via the door control panel with joysticks and push buttons. With the Auto-Drive option, all sweeping functions and driving commands in sweeping mode can be conveniently operated via the ergonomically shaped multifunctional control lever. Driving and sweeping from a single source also means greater safety and less stress.

The most important information is visible at a glance on the colour display in the roof console. With the help of the onboard diagnosis system, any faults can be localised quickly and efficiently, while a mechanic can make machine-specific settings on the display.

Smooth steering with a height and angle andjustable steering column, cruise control, minimal pedal forces, a comfortable driver's seat with AGR certificate ("Campaign for Healthy Backs") as well as operating and control instruments in an optimum grip area round off the performance features of a modern, ergonomic workplace.

Modern vehicle technology:
The hot-dip galvanisation of the entire vehicle frame, the suction mouth and important steel components, including the dirt container, provide high-quality corrosion protection.

The hydropneumatically suspended chassis with hydrostatic drive and large 15" wheels offers the highest level of driving comfort in this machine class. At the same time, high load capacity and large wheel contact areas ensure increased safety with low ground pressure, regardless of road and weather conditions. Optional 17.5" tyres are available to increase the permissible total weight to 5,000 kg.

The suspension package, which also incloudes a mechancial option, is perfectly matched to the machine, and ensures safe and comfortable, car-like driving. Good driving comfort, robustness and freedom from maintenance are all optimally combined.

The switchable all-wheel steering makes extremely tight turning manoeuvres possible, and is monitored by steering angle sensors, which enable automatic centring - so it is user-friendly and safe. A hydraulic dual-circuit brake system with disc brakes on the front and rear axle is fitted as standard.

IntelliOPS telematics platform:
The eSwingo 200+ can be connected to the Aebi Schmidt IntelliOPS telematics platform which provides comprehensive monitoring, selection, reporting and analysis functions. It enables rapid performance evaluation by displaying machine activity data live on a map and facilitates the use of collected data by providing detailed overviews and reports to optimise the work process.

Gallery

Video

International brands, dozens of satisfied customers

At CTE Solution, we believe that in addition to quality products, service should be unique. At CTE Solution, we only sell international brands and our design, financing and service services not only sell you the right machine, but also guide you through the entire project process. Our customer satisfaction is proven by dozens of positive feedbacks, we strive to have the most satisfied customer base among the service providers in Hungary.

International brands, dozens of satisfied customers