BHS RECYCLING & ENVIRONMENT Machines

The Recycling & Environment division of BHS-Sonthofen offers a comprehensive range of machines, processes and full-scale plants for the recycling industry, waste disposal and environmental technology. We offer a comprehensive range of recycling machines for the efficient processing and pre-/post-shredding of a wide range of recyclable and waste materials. Depending on requirements, this includes machines implementing crushing, cutting or tearing technology. You benefit from obtaining solutions from a single vendor: We accompany the entire process from consulting, process development and profitability analysis through to the planning and commissioning of turnkey recycling plants.

Comprehensive product portfolio

Turnkey recycling plants from a single source

Individual solutions

From very rough to highly refined processing

VR-1518_F_B_255Prozent_14
Waste materials are valuable because they contain highly sought-after resources.

Models:
VS, NGU, RBG, RPMV és RPMX etc.

Rotary shear (VR)
The rotary shear of type VR is a low-speed, high-torque twin-shaft crusher. The machine is suited for cutting large objects (such as domestic, commercial and bulky waste) and elastic materials (such as tires, cables, foils, paper and textiles) into small pieces. It also reduces large-volume input materials as well as parts with high unit weights. The rotary shear reliably achieves a very high level of cutting.
The machine is equipped with a large, central infeed hopper. In addition to standard solutions, customer-specific hoppers are also available. The machine housing is designed as a highly robust, one-piece, welded steel construction. This allows the machine to absorb extremely high forces without difficulty.
The material is shredded between two rotor shafts rotating in opposite directions towards the center. The shearing tools are specially positioned on the rotor shafts to ensure a high crushing performance. The scrapers are attached to the side walls of the machine housing and reach in between the shearing discs. They prevent material from adhering to and building up on the rotating shear discs. If discs wear out, each one can be replaced individually. Every shaft is powered independently. The drive consists of a spur gear and an electric motor from well-known manufacturers. In case of an overload, the drive allows the shearing disc to be retracted by changing the direction of rotation.

Universal shredder (NGU):
The universal shredder of type NGU is a high-speed single-shaft crusher designed for pre- and post-cutting of any material that can be cut. This includes paper, files, data media, textiles, wood, cables, plastics and packaging. It shreds the feed material to a size between 10 and 120 mm.
The loose feed material is loaded into the infeed hopper, which is individually adapted to the material and type of feeding. The rotor is produced from a solid forged part. A rotating wear protection element protects the rotor edges at the housing mounting point from wear.
The blades of the rotor and static blade seat are versatile and can be rotated or replaced in just a few steps. The style, quality and number of blades is configured to match the specific application at hand. The screen consists of multiple segments that can be replaced individually. The screen support can be rotated downwards. This makes it significantly easier to perform maintenance work.
The drive is frequency controlled, and the speed of the rotor is freely adjustable between 80 and 240 rpm. As a result, the machine can be configured to account for the properties of different feed materials. A hydraulically driven slide pushes the material along the base plate and toward the cutting system where cutting takes place.

Biogrinder (RBG):
The BHS Biogrinder (type RBG) is used in the processing of biomass for biogas generation. The BHS Biogrinder is in use in southern Germany to crush and mash organic domestic waste. The upstream substrate processing speeds up gas production in the fermenter. Overall, the biogas plant operates more efficiently and reliably.
The Biogrinder has a large feed opening, which allows the machine to be easily fed with different materials. The rotor is mounted on a vertical shaft. The material stream first connects with a distribution cone. Below this, the rotor has two levels, each of which can be fitted with a maximum of two pivot-mounted hammers. Crushing is carried out primarily between the rotating hammers and the stator strips on the machine casing. The arrangement of the hammers is variable, so that the rotor can be optimally configured for the specific task.
Enhanced uptake of nutrients for micro-organisms through intensive shredding, homogenization and defibration of the input material. Particularly effective in the case of highly fibrous biomass. Extraneous materials, such as soil clods and stones, are also crushed. Raw materials that were previously difficult or impossible to decompose in the fermenter can now be processed with ease after processing in the Biogrinder. Wide range of applications: corn silage, grass clippings, green/organic/animal waste, sugar beet, corn straw.

Rotor impact mill (RPMV and RPMX):
The BHS rotor impact mill is a high-performance crusher with a vertical shaft that addresses the needs of the recycling industry. The mill’s unique impeller rotor works together with a toothed anvil ring to subject the inserted material to severe mechanical stress. Material compounds are crushed and separated selectively, entangled materials are isolated, and brittle-hard materials are crushed very finely. At the same time, metals are shaped into balls and cleaned. Watch the video to find out how to optimally prepare shredder fractions for separation by disaggregating composite material and pelletizing metals with the RPMX rotor impact mill. The material is selectively transported into the gap between the anvil ring and hammer from above by means of the rotor cover plate. In this way, the full height of the grinding gap is utilized, resulting in a longer retention time and a higher stress frequency. An intense ball shaping effect is achieved in combination with a high circumferential speed, a narrow grinding gap of 4 to 6 mm and a specially toothed anvil ring.
Impeller rotor is one of its kind worldwide. The feed material is loaded into the top center of the machine. When it impacts the rotor, the material is accelerated towards the outside by means of centrifugal forces; there, the horseshoe-shaped hammers engage it and throw it against the anvil ring, In the milling gap, it is crushed as a result of the impact and shearing forces. The material leaves the rotor through the gap and falls down through two outlet chutes.

Optimum settings achieved thanks to adjustable rotor speed and annular gap.

Gallery

Video

International brands, dozens of satisfied customers

At CTE Solution, we believe that in addition to quality products, service should be unique. At CTE Solution, we only sell international brands and our design, financing and service services not only sell you the right machine, but also guide you through the entire project process. Our customer satisfaction is proven by dozens of positive feedbacks, we strive to have the most satisfied customer base among the service providers in Hungary.

International brands, dozens of satisfied customers